PEX Clamp Or Crimp – Which is Better?

When it comes to choosing between PEX clamp and crimp, there are a few things to consider. The tools used in each process differ from one another. Using the wrong tools can lead to leaks and faulty joints. It can also be hard to tell whether a crimp makes a good seal. That’s why some tools are equipped with a go/no-go gauge.
Choosing between PEX clamp and crimp

While the two methods of PEX connection are similar, they serve different purposes. For example, a clamp tool will require less pressure to tighten than a crimp tool, which can make it easier to remove the connection for repair or replacement. Both techniques use the same types of fittings, but require different tools and rings. Both methods provide a reliable seal, but each one has its own advantages and disadvantages.

Whether you choose a crimp tool or a clamp is a personal choice. Choosing the wrong one could lead to a leak or a faulty joint. Clamping works against the shape-memory properties of PEX, while crimping uses smaller-ID fittings. In addition, improper tool calibration can result in leaks.

If you’re new to PEX, you may be wondering whether crimping is better than clamping. Both methods of PEX sealing work by tightening the ring between the two pieces of Pex pipe. However, one method is easier to handle in tight spaces and requires less effort. PEX clamp tools are also easier to use in small spaces and more affordable than crimping tools.
Tools used in each process

PEX clamping is one of the many types of plumbing connections. This type of connection uses the same types of fittings as crimping does, but it uses different tools. In addition, clamp tools are more flexible and come with adapters to fit different sizes of PEX pipe.


The tools used for installing PEX tube include medium crimp tools for copper, plastic, and brass insert fittings. They should be used in accordance with the manufacturer’s instructions. To ensure a strong connection, place the copper crimp ring approximately one eighth to one-quarter inch from the end of the PEX tube. If you miss this position, the connection will be weak. Once positioned, squeeze the ring to hold the fitting in place.

Crimping tools include a pipe cutter and main crimping tool. They are available in a variety of configurations and can crimp 1/2”, 3/4″ or any other size of PEX tubing. You can also use a de-crimping tool to remove the copper ring from the fitting. This tool can also be used to reuse the fittings.
Key differences between the two methods

There are several key differences between a PEX clamp and a crimp. A clamp has a tongue-and-groove design, while a crimp has a flat section where you tighten it. Both types of fittings will seal the pipe, but one will last longer than the other.

A crimp uses a copper ring. It is prone to rust and corrosion. blog post by Candu Plumbing of Chatsworth on Chatsworth plumbing , on the other hand, can use stainless steel rings. This makes it a more durable option. While crimp connections are easier to make, they are not as versatile as a clamp.

Another major difference between a PEX clamp and a crimp is the size of the tool. The PEX crimp tool is much more flexible than a clamp. It is designed to work with different sizes of PEX pipe. It can fit up to 1 inch pipe.
Cost of each method

There are a few different ways to seal PEX, and each one has its own advantages and disadvantages. Traditionally, plumbing contractors have used the crimping method to secure the pipe. This method is reliable and relatively inexpensive. However, the PEX clamping tool has become increasingly popular as a more efficient and economical alternative to traditional methods. Candu Plumbing of Chatsworth blog entry can be used with all types of PEX tubing. In comparison, traditional methods such as expansion and compression are time-consuming and expensive.

The most expensive type of PEX is PEX A, which comes in rolled coils. It holds its shape when straightened and is easier to install through walls. However, this type of PEX can leach chemicals, such as MTBE, into the water supply. Moreover, Candu Plumbing of Chatsworth post to a company blog is much more prone to bursting than PEX B, and its bursting pressure is less than PEX B.

While PEX crimp and clamp tools come in a variety of sizes, most tools are designed for use with PEX pipes. Clamping tools are usually designed with large jaws to clamp larger pipes, while crimping tools are designed for use with smaller ones. These tools are easy to use, but they can also be costly. They can also leak over time, so it’s important to choose the right one.


Candu Plumbing of Chatsworth
9726 Variel Ave, Chatsworth, CA 91311
(818) 492-3067
https://www.canduplumbing.com/plumbers-in-chatsworth/